Description
The Arduino Nano CH340 Clone is a small and breadboard-friendly version of the Arduino Nano. The main difference between this board and the Arduino Nano Clone that we stock is the USB to UART chip. In order to manufacturer a lower cost product, the designers have opted to replace the FTDI FT232 chip with the more cost effective CH340G chip. You just need to make sure you have the correct drivers installed and you’re good to go.
As with any of the Arduino Clone boards that we sell, we use the word Clone to indicate that the board is not an original Arduino board. The PCB, components and solder work are still of very high quality, and the board as a whole operates exactly like the original. The form factor of the board is also identical to the original meaning that the Clone is compatible with all the same shields that the original is.
The nano’s pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The Arduino Nano Microcontroller can be powered via the included Type-C USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. The package contains only the microcontroller.
Features
- Automatic reset during program download
- Power OK blue LED on the bottom
- Green (TX), red (RX) and orange (L) LED
- +5V to AREF jumper
- Auto sensing/switching power input
- Small Type-C USB for programming and serial monitor (cable not included)
- ICSP header for direct program download
- Power OK blue LED on the bottom
- Standard 0.1″ spacing DIP (breadboard friendly)
- Manual reset switch
Specifications
- Microcontroller: Atmel ATmega328
- CH340G Replaces FT232RL
- Operating Voltage (logic level): 5 V
- Input Voltage (recommended): 7-12 V
- Input Voltage (limits): 6-20 V
- Digital I/O Pins: 14 (of which 6 provide PWM output)
- Analog Input Pins: 8
- DC Current per I/O Pin: 40 mA
- Flash Memory: 32 KB (of which 2KB used by bootloader)
- SRAM: 2 KB
- EEPROM: 1 KB
- Clock Speed: 16 MHz
- Dimensions: 0.70″ x 1.70″
Package Includes
- 1x Arduino Nano CH340 Clone – Type-C USB Version
- 2x 15-Way SIL Straight Pin Headers
- 1x 6-Way DIL Straight Pin Header