A9 IP Camera HD1080P Home Security Wireless Wifi Mini Camera with Nigh Vision Black

Description

Basic Settings and Indicator Status

A new camcorder or camcorder is installed in a new location, please reset the camcorder to factory settings. (After the camcorder is started, press and hold the camcorder reset button for more than 5 seconds), after the camcorder restarts turn on the AP mode, the WIFI indicator flashes slowly (Flashes once 0. 5 seconds). Then open the phone settings, connect the phone to the camcorder AP hot spot (the WIFI network with the camcorder UID), and wait for the phone to switch to the camcorder WIFI network before opening the App.

Indicator Status

1. In AP mode after booting, the blue indicator is always on and the red indicator is the USB power indicator, and it goes out after fully charged.
2. When configuring Wifi routing, the red indicator is normally on, while the blue one flickers rapidly. After a successful configuration, the blue indicator is normally on. (Please confirm whether the Wifi password is correct if the blue indicator keeps flickering rapidly)
3. The green indicator is a charging indicator, and it will automatically go out after the camcorder is fully charged.

Note

Please inspect the following items if the App keeps prompting failures；

1. Before configuring the Wifi network, the camcorder indicator does not flicker slowly or it is not started;
2. The phone fails to connect to the camcorder AP, and it is required to connect the phone to the AP hotspot of the camcorder;
3. An ordinary router is compatible, but the public router fails to be compatible because it is required to logon for authentication;
4. Avoid any mistake of network name, password, and UID;
5. Non-latin  Wifi names, passwords and special symbols are not compatible currently:
6. Use only 2.4GHz Wifi networks. 5GHz Wifi signals are not compatible;

FAQ

1. Q: Why does the APP fail to detect the camcorder/match a network?
   A: Please ensure the device is correctly connected and inspect whether the APP operation is restricted.
2. Q: Why does the camcorder keep asking me to input username and password?
   Or why does it prompt incorrect user name?
   A: The default password is admin. If you forget your user name and password, please reset it to factory settings to get the default user name and password.
3. Q: How can I reset the camcorder to factory settings?
   A: Press the reset button for about 5 seconds until the camcorder is restarted.
4. Q: Why is the image vague?
   A: Remove the protective film for the lens. If it’s still vague, you can rotate the lens and focus to get clear images.