5V 2-Channel Relay Module

22.00

The 5V 2-channel Relay Module is used to control two separate AC circuits, the relays act as switches that respond to corresponding signal received from the Arduino (or other microcontroller) , each channel has an integrated LED that indicates if the signal is high or low.

Only 2 left in stock (can be backordered)

Spread the love

Description

  • 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
  • Equipped with high-current relay, AC250V 10A ; DC30V 10A
  • Standard interface that can be controlled directly by microcontroller (compatible with Arduino ,Raspberry Pi, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
  • Indication LED’s for Relay output status
  • Size: 50.5mm(L) x 38.5mm(W) x 18.5mm(H)(1.99inch x 1.54inch x 0.73inch)

Dual-Channel Relay Module Pinout

Pin Number Pin Name Description
1 JD-VCC Input for isolated power supply for relay coils
2 VCC Input for directly powering the relay coils
3 GND Input ground reference
4 GND Input ground reference
5 IN1 Input to activate the first relay
6 IN2 Input to activate the second relay
7 VCC VCC to power the optocouplers, coil drivers, and associated circuitry

Dual-Channel Relay Module Specifications

  • Supply voltage – 3.75V to 6V
  • Trigger current – 5mA
  • Current when relay is active – ~70mA (single), ~140mA (both)
  • Relay maximum contact voltage – 250VAC, 30VDC
  • Relay maximum current – 10A

Additional information

TTL Control Signal:

5VDC to 12VDC (some boards may work with 3.3)

Maximum AC:

10A 250VAC

Maximum DC:

10A 30VDC

Contact Type:

NC and NO

Board Dimensions:

27mm x 34mm [1.063in x 1.338in]

Downloads:

https://arduinomodules.info/download/ky-019-5v-relay-module-zip-file/

Datasheet:

http://www.songle-relay.com/admin/uppic/200711239462347274.pdf